I just wanted to try the layout of an ISD 1 with the RO towers, but I seem to be doing something wrong. I took mission 3, battle 3, with the research facility at Kuat. This is where the ISD Juggernaut comes into action.
I have entered the flight group of the Juggernaut at Objects and after the = the abbreviation for RO Profile.
Have I overlooked something or read the readme wrong?
It would be nice if someone could help me
;1b3m3b.ini - Recon Imperial Research Facility
[HangarMap]
;ModelIndex_314_HangarMonitor
314, -1759, 813, 0x7FFFFFFF, 38600, 0
;ModelIndex_309_HangarCrane
309, 0, 1350, -915, 0x7FFFFFFF, 23500, 0
;ModelIndex_313_HangarGenerator
313, -2500, -5360, 0x7FFFFFFF, -2000, 0
;ModelIndex_315_HangarWorkStand
315, 0, 1879, -473, 0x7FFFFFFF, 8000, 0
315, 2, 1060, -1305, 0x7FFFFFFF, 49036, 0
315, 3, -1065, 200, 0x7FFFFFFF, 16600, 0
;ModelIndex_084_ContainerSphere
84, -1950, -2684, 0x7FFFFFFF, 32336, 0
;ModelIndex_083_ContainerBox
83, -1500, -2136, -722, 32836, 16480
83, -1541, -2428, 0x7FFFFFFF, 53100, 0
83, -1751, -1996, 0x7FFFFFFF, 31172, 0
83, 1579, -2860, 0x7FFFFFFF, 37036, 0
83, 1880, -2828, -722, 272, 16480
;ModelIndex_080_CargoCanister
80, -1195, -1910, 0x7FFFFFFF, 54372, 0
;ModelIndex_050_Shuttle
50, 2, 1600, -2200, -741, 50536, 0
;ModelIndex_050_Shuttle Lift
;50, 0, -1550, -4350, -933, 24500, 0
;ModelIndex_065_Otana Lift
65, 0, -1500, -4350, -865, 24500, 0
;ModelIndex_058_CorellianTransport Lift
58, 1500, -4325, -825, -8000, 0
;ModelIndex_052_Stormtrooper Transport
52, 4, -2450, -275, 0x7FFFFFFF, 4500, 0
;ModelIndex_002_Ywing
2, 2, 1300, -1123, 0x7FFFFFFF, 49036, 0
;ModelIndex_001_Xwing
1, 0, 2078, -740, 0x7FFFFFFF, 40036, 0
1, 0, -1103, -100, 0x7FFFFFFF, 16600, 0
1, 0, -1538, -798, 0x7FFFFFFF, 7700, 0
1, 0, 1100, -523, 0x7FFFFFFF, 49036, 0
1, 0, -1250, 560, 0x7FFFFFFF, 16600, 0
;ModelIndex_003_Awing - Rear postiion
3, 2, 100, -4800, -825, 33000, 0
3, 2, -900, -5400, -825, 28000, 0
3, 2, -500, -5050, -825, 33000, 0
3, 2, 600, -5450, -825, -25000, 0
;PLAYER POSITION
;1, 0, 0, -800, 0x7FFFFFFF, 0, 0
;RESCUE SHUTTLE POSITION
;50, 0, 1527, 259, 0x7FFFFFFF, 43136, 0
;EJECTED SHUTTLE POSITION
;50, 0, 1127, 959, 0x7FFFFFFF, 43136, 0
;ROOF CRANE POSITION
;316, 0, -1400, 786, -282, 0, 0
[Objects]
FlightModels\Frigate2Standard.opt = FlightModels\Frigate2Medical.opt
FlightModels\Frigate2Carrier.opt = FlightModels\Frigate2Medical.opt
FlightModels\Frigate2Strike.opt = FlightModels\Frigate2Medical.opt
ObjectProfile_FG_12 = RogueOne
[Resdata]
Resdata\Planet2.dat
[Skins]
AssaultGunboat_fgc_0 = BlackOps
;Mission Changelog
;Swapped Nebulon B
;XW, AW Hangar Map
;Fixed Briefing Icon
;Gun Tau = Black Ops
Where do I make the mistake with the other variants of a ship?
- Ace Antilles
- Posts: 7829
- Joined: Sat Jan 22, 2000 12:01 am
- Contact:
For a guide on how to use these options see the XWA Readme\Editing\Skins and Profile Guide.pdf
That's in the Readme file.
I'll answer more shortly
That's in the Readme file.
I'll answer more shortly
- Ace Antilles
- Posts: 7829
- Joined: Sat Jan 22, 2000 12:01 am
- Contact:
Long story short it should be 11 not 12.
ObjectProfile_FG_11 = RogueOne
In XWA you have to start from 0 not 1. I make that mistake a lot.
There is a setting in YOGEME options to renumber the listings from 0 which helps.
Here's the look of the turrets.
ObjectProfile_FG_11 = RogueOne
In XWA you have to start from 0 not 1. I make that mistake a lot.
There is a setting in YOGEME options to renumber the listings from 0 which helps.
Here's the look of the turrets.
You do not have the required permissions to view the files attached to this post.